BMR SWAY BAR KIT WITH BUSHINGS - FRONT - ADJUSTABLE - HOLLOW 29MM - - 2008-2009 PONTIAC G8 - RED - SB012R

$249.95
Out of stock
WILL SHIP DIRECTLY FROM MANUFACTURER
* THIS ITEM IS NOT ELIGIBLE FOR PURCHASE USING THE BTR SYNCHRONY CARD
ESTIMATED SHIP DATE: TBD

More ways to pay at checkout

Synchrony Care ImageSynchrony Care Image
Synchrony Financing ImageSynchrony Financing Image
Curbside Pickup

Be advised: Image may differ from actual product.

BMR SWAY BAR KIT WITH BUSHINGS - FRONT - ADJUSTABLE - HOLLOW 29MM - - 2008-2009 PONTIAC G8 - RED - SB012R

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SB012 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 29mm DOM tubing, the SB012 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. The sway bar is 2-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle. BMR Suspension designed the SB012 sway bar for street performance, autocross, and road race applications. The large adjustable sway bar’s three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bar. The SB012 front sway bar gives you a 87%-137% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB012 attaches to your G8 with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension! BMR Suspension’s SB012 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.! Hole 1 87% stiffer than OE bar Hole 2 137% stiffer than OE bar

Features
BTR SKU SB012R
Brand BMR Suspension
Part Type Sway Bar
Chassis PONTIAC G8
Finish RED
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account