BMR FRONT SUSPENSION BUSHING KIT (BK008 - BK018 - BK019) - 2010-2015 CAMARO - BLACK / RED - BK022

BMR FRONT SUSPENSION BUSHING KIT (BK008 - BK018 - BK019) - 2010-2015 CAMARO - BLACK / RED - BK022

Decrease camber change and increase steering and handling stability on your 2010-2015 Camaro with front lower control arm and steering rack mount bushings from BMR Suspension. The factory bushings are made from soft rubber and deflect during cornering, allowing the front wheel alignment to change when you want it to be consistent. Manufactured from low-deflection 88-durometer polyurethane, the BMR lower control arm bushings minimize control arm deflection, helping to maintain consistent camber during aggressive handling maneuvers. Designed for street performance and handling applications, BMR’s lower control arm bushings replace the soft factory bushings increasing steering and handling consistency by reducing bushing deflection. This keeps the camber settings of the front wheels more consistent as high lateral loads are applied to suspension. By reducing this deflection, your Camaro will be more predictable and repeatable in every part of a corner, giving you more confidence in your car’s abilities. Manufactured from low-deflection 95-durometer polyurethane, the BMR rack mount bushing minimizes steering rack movement, helping to maintain consistent toe during aggressive handling. Excessive rack mount bushing deflection can cause toe changes, resulting in erratic and inconsistent handling. BMR’s polyurethane rack mount bushing reduces that deflection, allowing for more consistent toe setting. This reduction in deflection also allows for dramatically improved steering response and overall feel, allowing you to be more confident as a driver. BMR Suspension’s BK018 Front Lower Control Arm Bushing Kit is available in red with zinc-coated inner sleeves. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.! NOTE: BK008 steering rack bushing is not used on vehicles equipped with electric steering. The BK022 Front Suspension Bushing Kit can be used on electric steer vehicles, however the BK008 steering rack bushing cannot be installed.