BMR SWAY BAR PACKAGE - 2005-2010 MUSTANG - BLACK - SBP010H

$509.00
Out of stock
WILL SHIP DIRECTLY FROM MANUFACTURER
* THIS ITEM IS NOT ELIGIBLE FOR PURCHASE USING THE BTR SYNCHRONY CARD
ESTIMATED SHIP DATE: TBD

More ways to pay at checkout

Synchrony Care ImageSynchrony Care Image
Synchrony Financing ImageSynchrony Financing Image
Curbside Pickup

Be advised: Image may differ from actual product.

BMR SWAY BAR PACKAGE - 2005-2010 MUSTANG - BLACK - SBP010H

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SBP010 sway bar package was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. The package consists of BMR’s SB022 front sway bar and SB023 rear sway bar. SB022 BMR Suspension’s SB022 front sway bar is manufactured from heavy-wall 35mm DOM tubing, the SB022 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle. BMR Suspension designed the SB022 sway bar for street performance, autocross, and road race applications. The large adjustable sway bar’s three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bar. The rate increases and adjustability allow you to fine-tune the handling characteristics of your Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB022 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension! SB023 BMR Suspension’s SB023 rear sway bar is manufactured from heavy-duty 22mm bar stock, the SB023 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB023 attaches to your Mustang with billet aluminum end links and 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. The CNC-machined, billet aluminum sway bar end links eliminate deflection. BMR Suspension designed the SB023 sway bar for street performance, autocross, and road race applications. The non-adjustable SB023 gives you a 52% increase in rate over the stock bar (depending on year and model). The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension! NOTE: BMR SB023 rear sway bar is not compatible with convertible models unless the additional OE convertible bracing is removed. Saves $20 when you purchase the package! BMR Suspension’s SBP006 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!

Features
BTR SKU SBP010H
Brand BMR Suspension
Part Type Sway Bar
Chassis MUSTANG
Finish BLACK
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account